Mr. Heater MH24T User Manual download pdf (Page 3)

Operating Instructions and Owner’s ManualMr. Heater | Gas-Fired Infra-Red Portable Heater

HOOK-UP INFORMATION

1.1 Heater model MH24T and MH24TS are packaged completely

assembled. Propane cylinders are not included with heater

models.

1.2 Remove heater assembly from carton.

1.3 Place the slots of the black collar mounting bracket assembly

onto the collar of the bulk tank (see Fig. 1)

CAUTION:

BE SURE THE LOCKING KNOB ON THE COLLAR MOUNT-

ING BRACKET ASSEMBLY IS OUTSIDE THE COLLAR ON

THE BULK TANK. Tighten the black knob against collar of

tank.

1.4

mounting bracket assembly with the three #6-32x1/2 screws

and #6-32 Keps hex nuts. Be sure screws and nuts are secure

and tight.

1.5 Make sure tank valve is in “OFF” position (clockwise).

1.6 Make sure regulator knob is in “OFF” position by turning knob

clockwise to off.

1.7

turning counterclockwise; then with a 7/8” open end wrench

tighten the POL fitting, hard.

1.8 Always connect the heater to bulk tank in the outdoors or in a

well ventilated area. NEVER connect heater to bulk tank near

an open flame.

1.9 Use only LP-gas cylinders constructed for use with propane only

LP-gas cylinders of the U.S. Department of Transportation (DOT

Spec. 39).

1.10 Read pages 3 and 4 before lighting heater.

WARNING

Never touch heater while in operation to avoid injury.

Move heater by grasping the propane cylinder carefully.

Figure 1

MODEL MH24T

LOCKING

KNOB

LP CYLINDER

POL NUT

TIGHTEN

REGULATOR

KNOB

HOSE ASSEMBLY

REFLECTOR

MODEL MH24TS

COLLAR

MOUNTING BRACKET

TANK VALVE

SAFETY

SHUT OFF VALVE

SPARKLITE IGNITER

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Mr. Heater MH24T User Manual Page 3

Comments to this Manuals

Related products and manuals for Space heaters Mr. Heater MH24T